Dual Beam LED Wall Light

Twin beams leaving one body turn the wall itself into the light source. One climbs, one falls, and what registers from a distance is the pattern drawn on the surface rather than a bright point. Repeated along a corridor or either side of a door it reads as architecture rather than as fittings.

Because the LEDs sit recessed at each end, there is no glare at eye level as you walk past. The fitting is offered in warm white or cold white; there is no other option axis, so the body and size are the same whichever output you choose.

We do not hold a published IP or weather certification for this fitting from the supplier, so we do not claim one. Have a qualified electrician confirm it is suitable for the position you have in mind, and choose a certified, rated fixture for any fully exposed location. For any outdoor installation use exterior-rated cable and glands. It is a hardwired fitting - isolate the circuit at the breaker panel first, and have a qualified electrician confirm the fixture's rated voltage before wiring it in.

• Twin beams wash the wall up and down from one body
• Recessed LEDs, no glare at eye level
• Warm white or cold white output
• No certified IP or weather rating is published for this fitting
• Hardwired fitting: qualified electrician recommended