Minimalist Up & Down LED Wall Light

An up-and-down fitting turns the wall itself into the light source. Two beams leave the body, one climbing and one falling, and what you see is the pattern they draw on the surface rather than a lamp shining at you. Repeated along a path or a corridor it produces a rhythm rather than a row of bright points.

The body is deliberately plain: a small rectangular block with the LEDs concealed at each end and no visible fixings. That reduction is what lets it work equally indoors and out, since there is no styling detail to look out of place in either setting.

Check the IP rating of the variant you choose against where you intend to install it, as exterior use requires an appropriate rating. This is a hard-wired fitting: isolate the circuit at the breaker panel before installation, use exterior-rated cable and glands for any outdoor run, and have a qualified electrician carry out the work, particularly outdoors.

• Twin beams wash the wall up and down
• Plain block body with concealed LEDs and no visible fixings
• Works indoors and out with the appropriate IP rating
• Repeats cleanly along paths, stairs and corridors
• Hard-wired fitting: qualified electrician recommended outdoors